After purchasing and importing special-shaped component plug-in machine equipment, in order for it to provide stable, reliable, efficient, and long-term service to production, professional, timely, and qualified maintenance is particularly important. Maintenance not only affects the performance of the machine equipment, but also affects production capacity and the service life of the machine; Unreasonable and unprofessional maintenance may even cause injury incidents.

So, where should maintenance be carried out specifically?

Precautions for non-standard plug-in machines:

1. Do not store machines outdoors, in high temperatures, or in humid environments;

2. There should be no strong electrical or magnetic interference near the plugin machine;

3. The plug-in machine should be placed horizontally;

4. Operators must undergo operation training and pass the qualification before they can take up their posts;

5. Maintenance technicians should be very familiar with this equipment;

6. Do not open the industrial control computer at will, do not unplug or plug it in randomly, and do not modify relevant files at will;

7. Ensure that the cooling fan operates normally at all times. If the replacement parts are high-quality products, try to use the parts provided by the equipment manufacturer.

A good device requires not only its own quality, but also good maintenance and upkeep habits in order to better perform its functions and extend its lifespan.

1、 Weekly maintenance and inspection methods for special-shaped plug-in machines:

Weekly maintenance should be carried out after 100 hours of equipment operation. If the operating environment is poor, the cycle should be shortened and the lubrication device should be checked.

1. Clean the dust on the surface of the sliding parts, and after cleaning, add 100CKR special lubricating oil;

2. Clean the glass of the centering camera;

3. Check the gripping and closing status of the material pickup head, and repair or replace it if there is wear and tear;

4. Check the cleanliness status of the air filter element, clean or replace the filter element;

5. Check whether the limit switches of each moving component are accurate and effective.

2、 Monthly maintenance and inspection methods for special-shaped plug-in machines:

1. Clean and replace the lubricating oil of the X and Y axis screw rods;

2. Clean and replace the lubricating oil of the Z-axis slider;

3. Check if the Z-axis transmission components are worn;

4. Check the accuracy of the Z-axis lifting action;

5. Check whether the R-axis transmission components are worn;

6. Check whether the rotation action of the R axis is accurate;

7. Clean or replace the head filter element;

8. Check if the head reset spring is worn;

9. Clean and replace the slider and guide rail lubricating oil;

10. Check if the origin of the equipment is accurate;

11. Check if the cooling device of the industrial control host is operating normally;

12. Check if the machine level is in a horizontal position;

13. Check whether the transmission components of the machine conveyor belt are worn;

14. Check whether the origin and adjustment width of the machine conveyor belt are accurate and effective.

Attention: The lubricating grease and oil used must use original lubricants as much as possible. Otherwise, it will shorten the service life of the screw and guide rail, and affect the accuracy of the machine.

In order for the machine to better serve you, please follow the above maintenance guidelines: create a "comfortable" environment for the machine.